Home > News > Content

Introduction Of Pre-painted Steel Coils

Feb 22, 2017

Pre-painted steel coils brief introduction:


There is revolutionized architectural and industrial designs for coils' coating.Steel coils has a high performance technique for applying a continuous coating to color metal sheets,sandwich panels,which results in vivid look,when the base metal shows higher durablility,even in bad weathering contidions.

Good processing and coating technology can make sure that coating can be firmly to adhere on the base of steel and can't peel off easily,when roll forming,bending or any other processing.

Various colorways,specifications,and good quality in smooth surfaces and steel material,make China steel new material company win customers' trust.


ppmc_process_big.jpg

We have passed  ISO9001:2015 quality system and get SGS certificate.

Our annual output is 10,000MT,and our color-coated steel sheets & coils are available in a wide spectrum of attractive colors, styles, and gloss or matt finishes, wrinkle finishes, varying thickness of substrate & coatings.



Pre Painted Galvanized Steel Coils(PPGI coils):


PPGI is pre-painted galvanized steel, also known as pre-coated steel,coated steel, color coated steel etc., typically with a hot dip zinc coated steel substrate.Paint coating,which acts as a barrier protection for the hot-dip galvanized coating surface and significantly reduces the corrosion rate of the zinc.

白灰卷.jpg


绯红卷.jpg


Pre Painted Alu-Zinc Steel Coils(PPGL coils):


Aluzinc is cold rolled galvanized steel with metal coating composed of Aluminum (55%), Zinc (43.4%) and Silicon (1.6%). PPGL coils achieved through the combination of the sacrificial protection of the zinc and the barrier protection of the aluminum,which have higher anti-corrosion performance.

ST008 (1).jpg


ST008 (5).jpg


ST008 (4).jpg



Product range:


THICKNESS

COIL WIDTH 

COIL INNER

COIL OUTER

COIL WEIGHT

0.12~1.5mm

600~1200mm

508/610mm

800~1500mm

max 6 Tons

PRODUCT STANDARDS:

1, GB/T2518-2004,01,02,03

2, EN10142:2000; EN10327:2004; DX51D+Z; DX52D+Z

3, JIS G 3302-1998, SGCC, SGCD1

4, ASTM A653 / A653M, CS(A,B,C), FS(A,B)

5, ISO 3575: 1996(E), 01, 02, 03